CUTTING MACHINES COMPARISON

Each machine has its own qualities and performance levels, but the objective is always the same: to produce gears and precision parts in large volumes

TECHNICAL DATA

MachineAF90AF100 plusAF101AF160
PART DATA (gear)
Max. diameter of part30 mm36 mm36 mm60 mm**
Max. machining length40 mm50 mm50 mm110-180 mm**
Rotation of headstock and tailstock5,000 rpm5,000 rpm5,000 rpm12,000 rpm
Minimum module0.02 mm0.02 mm0.02 mm0.02 mm
Maximum module (based on material and
number of stages)
0.5-0.8 mm0.5-0.8 mm0.5-0.8 mm0.5-2.0 mm
TOOL DATA
Max. diameter of milling-cutter24 mm24 mm24 mm50 mm
Max. width of milling-cutter20 mm20 mm20 mm80 mm (2x40)
Tilt angle of milling-cutter-/+ 10ø manual-/+ 30ø auto-/+ 30ø auto-/+ 50° auto
(-115° option)
Rotation of milling cutter spindle16,000 rpm16,000 rpm16,000 rpm16,000 rpm
TRAVEL
Travel along headstock axis Z/Z'64 mm82 mm82 mm200 mm
Travel along transverse axis X (radial feed)40 mm74 mm74 mm70 mm
Travel along shifting axis Y (tangential feed)55 mm84 mm84 mm90 mm
Tilt, axis A-/+ 10ø manual-/+ 30ø auto-/+ 30ø auto-/+ 50° auto
INSTALLATION
Voltage3x400/50 Hz3x400/50 Hz3x400/50 Hz3x400/50 Hz
Installed power7 kVA7 kVA7 kVA4 kVA
Dimensions (LxDxH)750x836x1,814 mm1,180x1,660x2,589 mm1,469x1,628x1,847 mm1,500x2,010x2,650 mm
Empty weight710 kg1,800 kg1,300 kg3,900 kg

* Depending on the set-up and quality required | ** Depending on the gripping tools | *** Option

Are you looking for a machine for making gears?